ALL QUESTIONS FAQ

FAQ

Printing FAQ

It's very simple, just follow the few tips below:

  • Send us the file in pdf, eps, ai or jpeg format in high resolution.
  • The images you wish to apply to your resin stickers must be embedded and have a minimum resolution of 300 dpi.
  • All fonts must be converted to tracing.
  • RBG colours must be converted to CMYK
  • Indicate the cut line with a different colour.


Attention: Refraction of light due to the lenticular effect causes small colour variations.

For any further information regarding the creation of the print file, please do not hesitate to contact us.

All files received are checked free of charge by our graphic experts before printing. In the event of problems or doubts about the graphics, you will be contacted promptly.

When ordering, it is necessary to select "Yes" in the "Print Selective White" option, so that white is activated as the tint to be printed.


In the file, colour the areas that are to be white with a special tint, with a legend identifying it as white.


Please note - for gold/silver/transparent materials, printing white underneath the colours increases the covering power of the colours.


Please contact us for more information.

You can upload your file immediately at the end of your order, later in your personal area or by sending the file directly by e-mail.

Of course, we create your sample of resin labels from 40 €. Please contact one of our operators to define the method of realisation.

No problem; contact us, our operators will support you.

Certainly, indicate them within the print file; we will reproduce them, trying to match as closely as possible, compatible with printing technologies.

Please note - refraction of light, due to the lenticular effect, will cause small and unavoidable colour variations.

Resin FAQ

Below are the main characteristics of the resin we use:

  • ultra transparent
  • medium/soft hardness (30/33 shores D)
  • durability of more than 10 years with outdoor application before yellowing

We use products with the following certifications to produce our resin labels:

  • ROHS
  • TUV
  • REACH
  • ELV
  • WEEE

FAQ about the order

Of course, to access reseller prices we ask you to

  • Register on our website
  • Contact us to enable reserved prices

You can pay with:

  • PayPal
  • Credit Card
  • Advanced bank transfer

Of course, when ordering you will be asked to indicate the desired delivery address.

You can check the status of your order directly in your private area.

Yes, you can select anonymous packaging when ordering.

Shipping FAQ

You will be able to choose the shipping date of the labels directly when ordering; in the case of payment by bank transfer, an additional 1/2 days must be considered for banking times.

The average delivery time from the indicative delivery date is 2/4 days.

If you are particularly urgent, you can use the Fast Doming service

Yes, only in Italy with GLS and BRT. When ordering, please indicate in the shipping address the branch that is most convenient for you to pick up.

Shipping costs throughout continental Europe are free of charge, except for any areas subject to extra costs that will be calculated when ordering.